cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Pixma iP110 will not turn on

kimrru
Apprentice

Hello all,

I have a Pixma iP110 printer that will not turn on. The printer is only pulled out of a drawer for printing on occasion, so it's not plugged in all the time. We've printed 2 times since mid-April to provide an idea of the frequency the printer is used. New toner was installed mid-April.

  • When pressing the power button, the toner moves (sometimes), the light flashes for 15 seconds (timed) and then the light goes out.
  • The printer is using WiFi, so it's not plugged into any computer.
  • Out of the 3 buttons, the light on the power button is the only one that flashes.

Any feedback is appreciated. Thank you!

1 ACCEPTED SOLUTION

Hi!

We've released a firmware update to take care of this issue. Learn more now by clicking HERE.

Hope this helps!

View solution in original post

53 REPLIES 53

I don't know why this happens, but turn off your wifi, connect the printer via a USB and you will be able to print. Make sure to switch off the wifi first !!

Your theory on the software update with auto safe in 15secs doesn't compute for me. After getting my printer to work again (see other my posts), I re looked at the auto switch off settings, they are still set up as 15min on battery power and 240min in AC cable.

I think, the issue is somehow with the printer trying to access the wifi network. If there's no network at all to access, the printer goes back to normal again. So true switching off your home network completely then turn printer on, hope that helps the issue for you (at least temporarily till canon figures out what they did).

*try (typed true)

Jay7119
Contributor

What it's extremely suspicious and obvious at the same time, is that we all are having the same issue within two days of one another.

My printer stopped working yesterday 01/06/22 and it had been working beautifully the past 7 years, never a single issue.

It was connected to wifi, though now it won't last in enough to reset it. I have tried with a USB instead but it won't communicate with the laptop.

Update: I managed to get it to work. See my other posts.

Jay7119
Contributor

I just fixed the issue following someone else's advice here. I don't know why this happens, but turn off your wifi, connect the printer via a USB and you will be able to print. Make sure to switch off the wifi first !!

ediaz
Contributor

Ok the issue to solve is, power off you wifi or your router, start the printer, reset the printer https://ij.manual.canon/ij/webmanual/Manual/M/iP110%20series/EN/UG/ug_changing_settings0980.html

After of that the printer will start normally and you can print using USB..

If you want use the wifi you need to reconfigure the printer using you canon software put a fixed IP and the gateway must be a incorrect one to avoid to the printer connect to internet

MarieG
Apprentice

I did as ediaz suggested - power off the router, start the printer, reset the printer. I was able to print a test page.  All looked well.

It is plugged in to USB and only the local USB printer shows in my printer listings

Then the printer TURNED ITSELF OFF,  AND WILL NOT START.  Same issue back again.

Canon better fix this.

 

open24hours
Contributor

It seems this is happening at the same time for Canon Pixma IP110 printers and perhaps other printer models, in locations throughout the world. I just noticed the problem with our IP110 yesterday; 2022-June-01. Last successful print was a few days ago. 

Since the same issue is occurring at the same time, it implies these printers "phone home" to check with a server controlled by Canon and something has gone wrong.

It seems to be a dumb mistake by system engineers. But also perhaps reveals that printers may have a secret "phone home" feature.

I hope they will post a public fix or announce a solution. I imagine the penalty for this bug is a massive increase in calls to Canon support.

Note: I posted my solution below in reply to other solutions.

Reporting from Los Angeles.

x22
Apprentice

I can't even change the network settings in the printer, anymore. In the past, I would sign in into the printer's wifi, which still works. Then using the canon app, I would dive into the settings and setup wfi and such. Like so:
https://ij.manual.canon/ij/webmanual/Manual/M/iP110%20series/EN/UG/ug_apmode0100.html

Has anyone been able to this successfully again?

Thanks!

Announcements