06-04-2022 06:52 PM
Hello all,
I have downloaded the new firmware as Canon suggested. We have turned the router off and on. My printer is cabled to my laptop rigtht now.
NO GO.
HELP AND ADVISE PLEASE
A
06-08-2022 03:08 PM
Hi APRILE,
Please disconnect the power cord from your router.
Turn your iP110 on.
Press and hold the RESUME/CANCEL button until the POWER lamp flashes 12 times, then let go of the button.
That will disable Wi-Fi on your printer.
Once complete, please follow the steps in this Knowledgebase Article:
https://support.usa.canon.com/infocenter/index?page=content&id=ART180792
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.