09-08-2016 01:09 AM
I have Rebel t6s and the picture preview does not work when i attache my speedlite 430EX. When i take flash off, preview works fine. How do i get picture preview to work with external flash attached?
09-08-2016 08:30 AM
What exactly is picture preview?
Do you mean the feature Canon calls "Live View"? Or, do you mean the way cameras show the captured image right after it was shot? Or, do you mean something completely different?
09-08-2016 09:46 AM
I meant reviewing the picture after it has been taken, not in live view.
09-08-2016 10:24 AM
This is not normal. Does it not display when the flash is used, or just when the flash is on the camera? I have both of these, so I will try this tonight and let you know.
09-08-2016 11:21 AM
09-08-2016 12:06 PM
Do you have an image on the card when you check photos on computer?
Is the problem perhaps that flash exposure is wrong and you are viewing a playback of a black image?
09-10-2016 06:26 PM
Mine works just fine, whether the flash is used or not.
09-10-2016 11:34 PM
It turns out that the proximity sensor above the viewfinder was being activated by a cover that i have on my camera, it shifts when flash is installed. A small cut made on the cover fixed the problem.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.