07-10-2016 03:45 PM
Hi, I have a Canon 5D mark II. yesterday when I was shooting in a studio I swich from automatic to M the shoter doesn't make click, I have to press again for the camera make the click, this happen only when I select, P, TV, AV, M and B, when I select, Automatic CA, C1, C2, C3 it works perfect, why is happening this if some one can help to solve this problem, I will appreciate
Thanks
07-10-2016 04:09 PM
Sounds like you might be in Live View or mirror lock.
07-10-2016 05:36 PM
Hi jrhoffman75, Thank you so much for your response, how I unlock or change that live view mode this happend when I use the viewfinder i always shoot using that way no the screen, thanks again for your help
07-10-2016 05:42 PM - edited 07-10-2016 06:13 PM
If this happens when you are loking through viefinder, not the LCD on rear of camera, then Live View is not the cause of your problem.
Follow these two steps:
07-10-2016 05:46 PM
Sounds like it's in mirror lock up.
07-11-2016 02:30 PM
Thanks Jhon and cicopo was awesome your help I did it now all good I was worrie thinking that could be something worst
Ipreciate your fast and great help
Victor
07-11-2016 02:34 PM
Glad we could be of help.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.