cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Update firmware 70D problem

Rahim99
Apprentice

hello
I got problem with my 70D current software 1.1.1

Its Probably a software problem :

this button below on the camera don’t work :

gallery , info , delete , Set button 

when i tried to make update from my memory card i can’t continue because “Set button” dont work

i tried to install Eos utility 2 ; it detected my camera i can use the software but when i try to update firmware it’s says clic ‘ Set button’ on your camera to confirm firmware update

i trying to use Eos utility 3 ; its says camera can not recognized ( i have try vers 3.10 and 3.15 last ) same msg err

 

can someone guide me to update my firmware 

 

thanks for your answer 

1 REPLY 1

NatalyaP
Product Expert
Product Expert

Greetings Rahim99,

The EOS 70D is compatible with the EOS Utility 2 software but it will not function with EOS Utility 3. Please check that the lock switch on the camera is not enabled. This switch is located towards the bottom portion of the back of the camera.

After the firmware has been copied over to the memory card, we can then navigate through the camera's menu to the firmware portion and proceed to update the camera's firmware. Touch screen functionality may not be available when going through the firmware update to where we would need to use the physcial dials of the camera. Rotating the dial clockwise and counter-clockwise will allow for us to select the options display in the camera's menu. The SET button would function to then allow us to select the action for the camera to begin the firmware update.

In case you continue to experience issues, then you may reach out to our phone support team where they can assist you step by step in real time with updating the firmware on the camera. They can be reached at 1-800-652-2666, Monday through Friday between 9:00 am to 9:00 pm ET and Saturday between 9:00 am to 7:00 pm ET.

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.