RP with RF 24-240mm focusing issue

[Tims32ford]

I’m new to Canon…been shooting Nikon since the 1970’s.  Just received my new USA warranty RP body and a refurbished RF24-240mm lens…from Canon USA.  I’ve reset everything back to factory settings…on A setting the camera/lens will focus and take an image at 10 feet, and at 20 foot distance, but will not focus at 50 feet or on the mountains across the valley…does not matter what the zoom setting on the lens is….so I can’t take an image at those distances (not in focus).  What am I doing wrong?

[stevet1 · Accepted solution]

Tims32ford,

As a process of elimination, do you have another lens you can try?

If your focus in OK on a different lens, then you know it's not the camera.

Steve Thomas

[Tims32ford]

I don’t (all Nikon stuff)…but my brother-in-law does…will try to get together with him in a couple of days. (he’s BUSY…anesthesiologist). Will post what happens.

[Tims32ford]

Hey Steve…after spending about 30 min with Canon technical support, Ben (support tech), he decide the problem was the refurbished (by Canon, no less) lens.  Turns out he was right.  Located a video shop here in Montana that had a RF mount lens…when it was mounted on the body, the AF issue went away.  Your suggestion to try another lens was correct.

[shadowsports]

Greetings,

Do you have the AF / Control switch on the lens set to AF?

[Tims32ford]

Thanks for the suggestion…but it is set to AF.  I’m betting it’s not the lens…direct from Canon USA…refurbished by them.