05-19-2024 04:42 PM
Hi All,
When shooting video on the R7, I would like to quickly switch between the normal shutter speed to slo mo.
Currently, when in video moode, I go to Menu/1/High Frame Rate and set it to Disable (59.94) or Enable (119.9). I would like to customize a button, or something, to allow me to quickly change between the two settings without going through the menu. I could not figure out how to do this with the instructions in the manual.
Is this possible? If so, please send a link or something to get me started.
Thank you.
Solved! Go to Solution.
05-19-2024 11:58 PM
I’m not sure you can program a button to switch frame rate and shutter speed. The solution is to use a custom mode C1/C2/C3.
You would configure the custom mode with the relevant shutter speed and frame rate then simply turn the mode dial to switch between settings while in video mode.
05-20-2024 10:25 AM
05-19-2024 11:58 PM
I’m not sure you can program a button to switch frame rate and shutter speed. The solution is to use a custom mode C1/C2/C3.
You would configure the custom mode with the relevant shutter speed and frame rate then simply turn the mode dial to switch between settings while in video mode.
05-20-2024 10:25 AM
Using C1 and C2 seemed to be what I needed. Thanks very much.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.