R5 Custom mode and coming back from sleep resets settings to initial from custom mode

[osya_bender]

Here is the use case:

- Set camera to custom mode, say C1 that has shutter speed 1/400 configured for it.

- While in C1 shoot as usual adjusting shutter speed as need, say to 1/125

- Let camera go to sleep

- Wake the camera up

Observe shutter speed is reset to 1/400

I'd expect this not to be the case because letting camera going to sleep and waking it up is not the same (shouldn't be) as turning it off and then on.

If you enable autoupdate for the custom settings it will keep updating it with whatever you choose duting shotting but this kind of defeats the purpose of the custom mode in my opinion, where you are guaranteed to always start from the same set of settings when switch to that mode.

[aneuens]

1.5.2  what should be the latest

[aneuens]

that is not a full factory reset/ returning it to the stat when it came out of the box the first time. se also here Cannot factory reset eos R5: Canon EOS R Talk Forum: Digital Photography Review (dpreview.com)

[aneuens]

lets simplify the request to the max. when the camera returns from power saving or an off/on, all the settings should remain as they were before the power event. If I want to change something, i'll do it. if I want a specific configuration, I will load the according custom settings. Thats it. this works on Fuji, Panasonic, Sony and Nikon. the R5 is the first camera that changes settings on its own and this is annoying and I cannot see any circumstance where the actual behavior would be of any advantage, so why does canon do so?

[Tronhard]

I can't help you if you don't answer the questions!  You keep telling me what you want, not what you're doing in a way I can emulate.  If you are saving M settings to C1-3 it makes a difference.

[aneuens]

was this your question?

"As I understand it: you are recording a Custom setting of a Manual mode, and that includes a specific shutter speed, a specific aperture and you set the ISO to auto.  When you adjust the shutter speed and let the camera go back to 'sleep' the camera defaults to the original shutter speed.  The exposure compensation does not work to retain those setting in this situation.  Is that a summary of the situation?"

I was newer talking about exposure compensations, and yes, everything is manual even ISO and the only request is that the camera turns back on with the same settings it turned of.

[Tronhard]

OK... BTW, I was trying to help you with my use of the EV dial in M mode to maintain your shutter speed but that apparently didn't work for you.  It works for me, perfectly.

One thing you want to investigate and read up on is the Safety Shift feature in the Custom Menu Group, pager 1, at the bottom.  See P821 of your manual and check your settings. They could well be overriding the options you are storing in the Custom Shooting Functions.

[r1ch]

 That's what I That's what I thought I still have my D810 and I will and I was going to test it but I'm pretty sure my con does not work the same way the R5 works. The D810 works the way I think all cameras should work.

[r1ch]

Yes

[Tronhard]

I found this reference at: Custom Shooting Modes and How Bryan Configures "C" Modes (the-digital-picture.com)

"How to Configure a Custom Shooting Mode

Configuring a "C" mode is very easy. Simply adjust all of your camera settings as desired for the "C" mode being programmed and then find and select the "Custom shooting mode" menu option located in the "Tools" tab. Next, select "Register settings". If more than one "C" mode is available on your camera, the mode number desired must then be selected. Done. That's it. That "C" mode is programmed.

Two other "Custom shooting mode" menu options are available. The first is "Clear settings". I don't recall ever using this one. I simply program over the top of an already configured "C" mode if I want to make a change and haven't felt a need to clean up any no-longer-needed "C" mode.

The other available option is "Change Auto update set". While a "C" mode is being used, camera settings can be changed. When "Change Auto update set" is set to "Enabled", any camera setting changes made while in a "C" mode are saved to the respective "C" mode. The camera will retain the new settings even after being powered off. When this option is set to "Disabled", the camera will revert back to the originally programmed settings when the camera powers off. My cameras all have this feature set to "Enabled". "Enabled" requires a little more attention to the as-last-configured settings when beginning to shoot, but ... I found "Disabled" to be somewhat maddening and requiring even more constant attention."

[aneuens]

I double checked. safety shift is turned off