cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

My EOS R refuses to take a photo whenever it isn't focused.

SamuelGong
Contributor
I can't seem to take photos with my EOS R in low-light conditions. The reason for this is because it cannot focus. My camera doesn't want to take a photo when it's out of focus. I used to have a problem like this on my 80D I had borrowed from a friend, but then I fixed it in the settings. I don't remember which setting it is that allows you to take photos when you are not in focus. I am on manual mode using SERVO AF on release priority. I would've thought release priority solved it but it doesn't seem to make a difference. Please reply immediately as I am going to shoot tomorrow morning. To sum up my problem, I need my camera to be able to take photos even if it isn't focused.
15 REPLIES 15

You can try the custom function that lets you shoot without a lens. I have no idea what it does - maybe nothing - if you *do* have a lens.

Hellreaver
Apprentice

I had the exact same issue with my RP. What I did was set it to manual focus in the body and focus to infinity manually. There's no physical infinity stop like there is on older lenses, but there's a software stop, at least on my RP. 

That's really not ideal at all and honestly makes no sense because there are a lot of entirely encoding focus lenses that have no mechanical connection. On top of that, you're stressing the AF motor and also getting tape residue on the lens.... 

 

There's a built in solution for this that you're either ignoring or unaware of and such a jank solution is not necessary. 

1. Gaffer tape leaves no residue. 
2. With lens set to MF the focus motor is not engaged.

John Hoffman
Conway, NH

1D X Mark III, M200, Many lenses, Pixma PRO-100, Pixma TR8620a, Lr Classic

I live in Arizona, so unfortunately every tape leaves residue. My apologies on the second point. 

 

Why not do this the right way, with mf and locking at infinity through the body? 


@Hellreaver wrote:

I live in Arizona, so unfortunately every tape leaves residue. My apologies on the second point. 

 

Why not do this the right way, with mf and locking at infinity through the body? 


This is an almost five year old thread that is marked as solved.

If you have a camera-based solution that will prevent a manual focus lens (by design or as switched) from shifting focus if the focus ring is inadvertently moved, you should start a new thread for the benefit of the Community. I am not aware of any; always open to learning.

John Hoffman
Conway, NH

1D X Mark III, M200, Many lenses, Pixma PRO-100, Pixma TR8620a, Lr Classic
Announcements