01-19-2021 05:46 PM
have an EOS ds1 MkII and Speeotron lighting. Its not recommended connect directly so is the Wien Safety Sync the option options or are there others?
Thanks
01-19-2021 07:30 PM
Do you own an older Speedotron unit? The units made in recent years works fine with the PC terminal on Canon 1 series equipment which is rated for up to 250 volts.
If your strobes are of the older type, then you will need to use one of the buffer/interface triggers but there is no need for that with modern flash units which already use low voltage triggering lines. The manual for your studio strobe will show the sync voltage level.
Rodger
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.