08-18-2024
08:23 AM
- last edited on
08-18-2024
08:27 AM
by
James_C
#DSLR #Camera
08-18-2024 09:05 AM
Welcome.
Was your camera exposed to a laser, perhaps in a show? Looks like sensor damage.
08-18-2024 09:12 AM
Is this something I can clean or I will have to send it in?
08-18-2024 10:16 AM
@margoS242 wrote:
Is this something I can clean or I will have to send it in?
If it is sensor damage due to laser the only remedy is sensor replacement.
You would need to send it to Canon or an independent repair shop.
You can buy an "excellent" condition used body from Keh for about $500, so use that as reference when evaluating overall repair cost.
08-18-2024 09:07 AM
Yes I was shooting at a party and then that happened lots of lights
08-18-2024 10:34 AM
If it is damaged by laser, then you may still be able to use it if you only shoot in raw format and use RawTherapee. There is a bad pixel list you can create for the bad pixels.
08-18-2024 10:36 AM
Thank you so much, is this a software?
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.