07-29-2024
12:54 PM
- last edited on
07-30-2024
09:25 AM
by
Danny
I'm trying to update my R7 firmware from 1.3.1 to 1.5.0. I've downloaded the file and copied it to a formatted card but when I try to load it onto the camera I get a message saying:
Update Firmware?
1.3.1 > 1.5.0
EOSR7150.FIR
Cancel OK (boxes)
The trouble is the OK box is greyed out so I can't load it. Any ideas?
07-29-2024 01:07 PM
Did you unzip it?
mac or PC?
07-29-2024 01:26 PM
Yes I think so, I've got the .FIR file. PC.
07-29-2024 01:31 PM - edited 07-29-2024 09:27 PM
Did you try selecting the greyed out OK option?
07-29-2024 01:39 PM - edited 07-29-2024 01:39 PM
You have to use the main dial next to the shutter button to move the selection to the ok button then press the SET button as the touchscreen is not active at that stage of the firmware update.
08-01-2024 02:10 PM
err - that button is not next to the shutter button but is at the back of the camera to the right of the screen door - but yes click right then set.
08-01-2024 02:25 PM
He is talking about the main dial:
#4 in this image.
Either control will work.
08-01-2024 02:18 PM
Yeah, it took me a while to figure it out, too.
You need to use the right arrow on the 4 way selector on the lower right side back of the camera (I forget what it's called) to move right and select the OK button.
Good luck!
Loren
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.