08-22-2024
10:01 AM
- last edited on
08-22-2024
10:55 AM
by
Danny
Howdy, I am new to the Canon ecosystem. I am sure this is an easy setting but would like some input. Would like to lock the F stop and speed and let the ISO vary. Any suggestions? Thanks and sorry if its an easy question.
Solved! Go to Solution.
08-22-2024 10:38 AM
It is not an easy setting.
However, Ken Rockwell says that the R7 will do it in Fv mode:
08-22-2024 10:16 AM
Hey there!
Welcome to the Canon Community! So that you get the most accurate info, it's helpful to know which Canon camera you're working with.
08-22-2024 10:51 AM
Sorry about that EOS R6 MII
08-22-2024 10:38 AM
It is not an easy setting.
However, Ken Rockwell says that the R7 will do it in Fv mode:
08-22-2024 10:53 AM
Very cool. Thanks for the help. I will give it a shot (literally) (BTW, EOS R6 MII)
08-22-2024 11:08 AM
He says the R6II will do it, too. You might want to check out his usage guide:
https://kenrockwell.com/canon/eos-r/r6-ii.htm
08-22-2024 10:55 AM
Thank heaven for Ken Rockwell! 😊
08-22-2024 02:34 PM
You can use manual exposure mode, M on the mode dial, and then select the aperture and shutter speed you want, but leave ISO set to AUTO ISO.
If you really want to lock the shutter speed and aperture values, then use the multifunction lock and configure it to lock the main and quick control 1 dials. This will then stop you changing the shutter speed and aperture while the lock is active. Lock iOS the middle position on the power switch.
08-22-2024 03:30 PM
Thanks. Another great solution. Really appreciate it.
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.