I’ve just received the EOS R10 and would like to know if others have had any experience connecting a sound board. I’m presuming the mixer would connect via the 3.5 mm input on the camera, meaning I’m reducing the 1/4” or XLR from the mixer to fit the 3.5 mm. Does anyone have experience with this? Thanks
Solved! Go to Solution.
Have you read the specifications for your camera? It does not appear to have an input for an external microphone. It has “Audio Out”, but no audio/mic input. I believe you will need an external recorder.
What are you trying to accomplish? The camera's 3.5mm jack is for input (typically a microphone). Are you wanting to output signals from the mixer into the camera? Or are you wanting to feed audio out from the camera to the mixer? The camera doesn't have any audio output.
I'm not sure if that would work as I don't see any settings for audio input regarding line level input (I'm assuming the mixer would output line level signals).
Since there's a difference between line level and mic level regarding current (line being higher and mic being lower), I would not risk hooking up the mixer to the camera's mic input. Unless you'd know for sure that the mixer can output a signal for mic-level inputs.
09/26/2023: New firmware updates are available.
08/18/2023: Canon EOS R5 C training series is released.
07/31/2023: New firmware updates are available.
05/31/2023: New firmware updates are available.
05/18/2023: New firmware updates are available.
03/30/2023: New firmware updates are available.