cancel
Showing results for 
Search instead for 
Did you mean: 

Canon EOS M50 wont take pictures with new lens?

ibpigeonmaster
Apprentice

So I have a canon eos m50, a friend of mine gave me an old canon 75 to 300mm zoom lens for EF cameras so I went on to amazon and bought a cheap 3rd party adapter from Fotodiox. Now, because of some unfortuante advertising on that product I didnt realize that it was a fully manual adapter. When I put it all together the lens looks surprisingly good but for some reason I cant take any photographs with it. I dont know a ton about cameras but basically im wondering if that lens can even take a picture with a manual adapter, I would assume it nees some kind of electronics for the shutter to even fire but then again im unsure if that would matter for a mirrorless camera. anyway any information is appriciated.

 

         -thanks

1 ACCEPTED SOLUTION

MikeSowsun
Authority

This adapter has no electrical communication with the lens and the camera thinks there is no lens attached. The camera has a setting to enable or disable shooting without a lens attached. You should really get the proper adapter with electronic contacts so that you can control Auto Focus and Aperture with the EF 75-300 lens.

 

In the mean time you can enable shooting in the Custom Function menu.

 

First, make sure the camera in not in the green "A" mode. Then look in the camera menu for Custom Functions and under CF II there will be an option for shutter release when no lens is attached. 

 

LINK: release the shutter when a lens is not attached

 

1E4A83EB-3E14-431D-B712-1F85AF7121C6.gif

Mike Sowsun
80D, 5D Mk III

View solution in original post

4 REPLIES 4

MikeSowsun
Authority

This adapter has no electrical communication with the lens and the camera thinks there is no lens attached. The camera has a setting to enable or disable shooting without a lens attached. You should really get the proper adapter with electronic contacts so that you can control Auto Focus and Aperture with the EF 75-300 lens.

 

In the mean time you can enable shooting in the Custom Function menu.

 

First, make sure the camera in not in the green "A" mode. Then look in the camera menu for Custom Functions and under CF II there will be an option for shutter release when no lens is attached. 

 

LINK: release the shutter when a lens is not attached

 

1E4A83EB-3E14-431D-B712-1F85AF7121C6.gif

Mike Sowsun
80D, 5D Mk III

awsome, that did it. I have an electronic adapeter on its way but it will be nice to play around with this one until then. Thank you!

Thank you so much for this solution!  I never would have figured that out on my own.

hamed_y61
Contributor
Hey man, you are awesome.
I had same issue, and now Whit your advice, everything solved
Thanks
Announcements
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
03/22/2022: New firmware version 1.2.0 is available for PowerShot PICK
03/16/2022: New firmware version 1.5.2 is available for EOS-R5
03/16/2022: New firmware version 1.5.2 is available for EOS-R6
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.1.1 is available for EOS-R3
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x
12/7/2021: New firmware version 1.1.1 is available for CR-N 300
12/7/2021: New firmware version 1.1.1 is available for CR-N 500
12/2/2021: New firmware version 1.1.0 is available for RF 70-200 F4 L IS USM