03-02-2023 05:44 AM
Hello, i have a Canon A1 that wasnt showing any signs of power even with new batteries. I proceeded to open the top of the camera and the black and orange wires that are under the winding lever have come loose with the brass/copper film that they were connected to. The question being can i fix it with aluminum foil and solder, maybe solder the two wires together and have it basically bypassing the switch and everytime i want to turn it off i need to take the battery off or does it not work like that? I have no knowledge of this electronics
Thanks in advance and please forgive my semi botched english.
03-02-2023 06:59 AM
I think the most reliable solution would be soldering the two wires together. Before you do that you could verify solution by just twisting together and installing/removing the battery. Have battery out anytime you are moving the wires around.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.