06-04-2017 02:52 PM
Hi,
I have a 60D. i used to be able to shoot bracket photos from the eye view finder. I sent it in for sensor cleaning and now I can only shoot bracket from the Live Mode LCD screen. the tech that did the cleaning said that he didn't change anything but now bracket isn't working. Can someone tell me what setting to look for to change it back?? TIA
06-05-2017 08:58 AM - edited 06-12-2017 03:37 PM
@DebiC wrote:HI,
Thanks for the help! I really appreciate it.
I've not changed any settings but when I got it back from being serviced it was like this. How do I check the settings you're talking about??
If the camera was serviced by Canon, I'm surprised you're having a problem, as they're ususlly very thorough and reliable. But they do set the camera to factory settings (except things like name and copyright notice) as part of their testing. So you may need to correct any non-standard settings that you use. The settings are all described in the instruction manual.
If it was serviced by someone other than Canon, I'd start by resetting to factory settings. That might make it easier to track down the problem.
06-12-2017 12:10 PM
Just an update: this has been solved! I got on with Ok-Canon and figured out that when the sensor was cleaned the Mirror Lockup was left enabled!! Disabled it and now the camera functions as expected. Thanks for all the help here and the 800 number for me help!
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.