10-21-2022 11:43 AM
Hi Guy’s,
I have a Canon EOS RP. I can focus through the viewfinder but cannot get the beep to sound. It will however focus and beep through the lcd monitor.
Does anyone have advice on how to sort out this problem (if it can be sorted out!?)
Regards,
Johnny
Solved! Go to Solution.
10-23-2022 10:24 AM
Thanks for the info Trevor,
I decided to reset the camera back to factory settings and this worked!!
Regards,
Johnny
10-21-2022 12:10 PM
Hi again:
Is it possible the camera is working in silent mode, as per P89 of the Advanced User Guide?
10-22-2022 10:17 AM
Hi Trevor,
Thank you for your reply,
I am shooting in av mode. I believe you can have a silent shutter in scn mode.
Regards,
Johnny
10-22-2022 11:47 AM
Hi Johnny:
Silent shutter is different from getting a focusing beep. Silent shutter is about using electronic shutter to eliminate mechanical noise. In your original post you said "I can focus through the viewfinder but cannot get the beep to sound" that is a totally different issue, hence my reference to the manual feature that governs that.
10-23-2022 10:24 AM
Thanks for the info Trevor,
I decided to reset the camera back to factory settings and this worked!!
Regards,
Johnny
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.