cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Broken Contact - EF 100-400 LENS will not work

bama924
Contributor

I have a t8i that I use for sports photography, went to shoot soccer matches Saturday, but my t8i would not shoot?  Had to use my back up.  Just noticed that one of the contact on the end had broken off, other lenses work, but not the 400.  Can this be repaired, or am I out a camera?

2 ACCEPTED SOLUTIONS

You can start a repair request on the Canon website. Whether or not they will cover it under warranty I can't say. It certainly is new enough.

View solution in original post

You can go to your My Canon Account and start the repair process. It will walk you through the whole thing step-by-step.

 

Log in or sign up at canon.us/account

 

Once our team gets your gear, they'll let you know upon evaluation whether it's considered covered under warranty or physical damage - only the folks at the Factory Service Center can determine that.

 

You'll want to make sure to upload your proof of purchase (receipt) to your My Canon Account when you register your camera - that will expedite your repair process and let the team know it's still within the warranty period, too. A legible copy/PDF of the invoice is required - not a credit card statement. 

View solution in original post

16 REPLIES 16

jrhoffman75
Legend

What contact? One of the contacts in the body that mate to the lens? Can you post a screen shot?

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

It is the contact in the body of the camera.IMG_6183.jpg

Contact Canon, it can be repaired

I called the 800 number, there was a 40 minute wait.  My camera is less than a year old, is there a better way to contact them, and to see if it is covered under warranty?

You can start a repair request on the Canon website. Whether or not they will cover it under warranty I can't say. It certainly is new enough.

Just watching this post, JIC I need repairs by Canon or an authorized repair facility.

 

Edit: FWIW, I have made it a practice to keep receipts, etc., regarding a purchase for any warranty claims. My wife and I went through a receipt file that weighed about 7 lbs. and pared it down to a few ounces. Tossed info on old TVs, appliances, etc.

John

You can go to your My Canon Account and start the repair process. It will walk you through the whole thing step-by-step.

 

Log in or sign up at canon.us/account

 

Once our team gets your gear, they'll let you know upon evaluation whether it's considered covered under warranty or physical damage - only the folks at the Factory Service Center can determine that.

 

You'll want to make sure to upload your proof of purchase (receipt) to your My Canon Account when you register your camera - that will expedite your repair process and let the team know it's still within the warranty period, too. A legible copy/PDF of the invoice is required - not a credit card statement. 

ebiggs1
Legend

"Can this be repaired, or am I out a camera?"

 

I have no doubt that Canon can repair this. However, are you a person that cleans the contacts regularly? Perhaps vigorously?

Nothing but a soft q-tip with a bit of alcohol on it is best. I don't even recommend folks do that if they change lenses often as the mounting and unmounting will keep the contacts clean enough. 

 

If it just failed or fell out for some reason, I can't see how they can deny a warranty repair but I'm not Canon. It will surprise me if they do deny it.

EB
EOS 1DX and 1D Mk IV and several lenses!

I suspect Canon will cover the repair.  That type of failure isn't something that would occur through typical mishandling. 

 

It appears the connector pin probably had a material flaw and sheared in the center; perhaps this spring loaded pin jammed in the extended position and sheared off but neither case would be caused by the customer.

 

Even milspec parts have a non-zero manufacturing defect rate and milspec connectors wouldn't be used in this application.

 

This should be a simple repair for the service center assuming that connector assembly isn't one of the many weird pandemic related parts shortages.

 

Rodger

EOS 1DX M3, 1DX M2, 1DX, 5DS R, M6 Mark II, 1D M2, EOS 650 (film), many lenses, XF400 video
Announcements
03/14/2023: New firmware version 1.8.1 is available for EOS R6

03/02/2023: New Firmware Updates Are Available:

EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.