cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

A Little Help, Please? EOS M3

PartiJessi
Apprentice

Hello

 

I have an EOS M3 I have used for vlogging and youtube videos in the past. I was never able to figure how to connect to my computer, (now running Windows 10) so I would instead transfer images/video over wifi to my iphone (now iphone X), and then tediously to my computer for editing.

 

I have a multitide of blocks here today. I would appreciate some help if possible.

 

 

  • Upon attempting to connect to my computer, I notice on my eos m3 menu the computer icon is not available. I also cannot locate my USB cord... I believe it was misplaced during my move or by my organizers

 

  • I attempted to connect to my phone like previously, however the canon app Canon Camera Connect will not pick up my EOS M3 signal. It doesn't show on the device list. 😞 This app is constantly changing and apparently I cannot (or my camera cannot) keep up

 

  • When I tried to connect to my computer via EOS utility, my EOS M3 was angry and told me to check my computer settings. Is this a firewall issue?

 

 

I'm at a loss here and very sad because creating videos is my outlet and I'm either stupid and confused or something is terribly wrong. Navigating this camera's settings is not very intuitive to me. 

 

Thanks for any help/suggestions in advance. I really appreciate it.

 

-Jess

 

 

4 REPLIES 4

kvbarkley
VIP

Any USB cord will work if it has the correct connections.

found the mini USB

 

Connected to computer. No device detected whatsoever.

 

When I tried to connect via iphone X on canon app, no device detected either. 

 

Is it my camera??

Waddizzle
Legend

I suggest that you check your computer for an SD slot.  A USB card reader works, too, but that still requires a USB cable..  

 

The camera does not connect to the PC via Wi-Fi.  Your PC is not a Wi-Fi hotspot, something which most iPhones are able to do.  Your camera and PC connect to a common Wi-Fi hotspot.

--------------------------------------------------------
"The right mouse button is your friend."

thank you will check for SD

Announcements

03/30/2023: New firmware updates are available.

EOS R3 - Version 1.4.0

EOS R5 - Version 1.8.1

EOS 1DX Mark III- Version 1.7.1

Speedlite EL-1 - Version 1.0.2

03/30/2023: Product Advisory for EF50 F1.2 L USM

03/30/2023: Product Advisory for EOS R10


03/28/2023: New firmware version 1.0.3.1 is available for EOS-R5 C
03/14/2023: New firmware version 1.8.1 is available for EOS R6
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.