11-01-2014 10:21 PM
In Manual Mode on the 7D Mark II, with a hard ISO set, the exposure level indicator disappears from the bottom of the viewfinder. If you switch ISO to Auto, the exposure level indicator appears at the bottom of the viewfinder as expected.
Is there a reason that there is no exposure level indicator visible (except the vertical one on the right side) in Manual Mode when an ISO is set manually? This seems like it might be a glitch.
Thanks.
Bev
Solved! Go to Solution.
11-09-2014 04:56 PM
08-07-2018 08:12 PM
I was the orginal poster of this topic.
I sent a 'snail' mail to the president of Canon. He gave it to a subordinate. His subordinate said he would look into it. That was the last I heard from him.
What I find interesting is that in manual mode the other new Canons, i.e. 5d Mark IV, 6D, and others have the exposure scale visible on the top of the camera, but not the 7D Mark II.
Physically everything is in place on the 7D Mark II to implement this change. All it requires is a firmware update. A sharp programmer could fix this in about 3-4 hours and Canon could roll out the new firmware.
Very disappointed in Canon.
08-08-2018 04:00 AM
Thanks for your comments. The best advice I got from Canon's helpdesk was to "reset to factory settings". Pretty unhelpful and I felt the folk on the phones were not really preapred to take this any further. Probably they are not encouraged to? i also sent a letter to the UK head office in Reigate a few months back and got no reply. Perhaps Canon should suffer the effects of ignoring its customers?
11-30-2014 10:05 AM
@cale_kat wrote:
I think you should return the camera. Please post again when you have done it.
So that you can then order it from the refurb shop. Right, Cale?
03-12-2019 03:39 AM
For me, that is not an option any more. It is too late for that. I bought Mark-II because my EOS 7D developed problem. It was flashing the sensor cleaning screen every 2 seconds, even when the camera was turned off. And if I had a memory card in it, the light was also flashing between the sensor cleaning screen. I didn't want to spend over $500 to have it repaired. But I had it repaired it anyway because I thought I'll sell it. The buyer backed out, and now I have two 7D's, original, and Mark-II. And I am using the original more than the Mark-II because of the Exposure Meter issue with the Mark-II. It is frustrating.
11-29-2014 09:11 PM
11-29-2014 09:13 PM
11-29-2014 09:17 PM
01-27-2015 11:41 AM
I love this camera. I HATE it that they eliminated the exposure level indicator in Manual Mode on the bottom of the viewfinder. There are times (bright sun coming in from the side and wearing glasses) that I can't see that right-side level indicator at all. Please, people, if this bothers you at all, call Canon and complain about this: 1-800-652-2666. It's possible it can be fixed with a firmware update.
Cheers,
Jim Esten
02-05-2015 02:51 PM
I can't imagine Canon not changing this in a firmware revision. This change makes absolutely no sense. I'll deal with it but I'm not liking it.
06-06-2015 12:50 AM
The engineers and designers at Canon fell asleep at the wheel or management was pushing too hard to get the Mark II into production!!!!
I am very extremely disappointed with the exposure level indicator in Manual Mode. If I could take this camera back I would. For me this is a show stopper.
I am currently in Switzerland and wanting to do some manual exposure settings for some creative shooting in some snow scenes. The exposure meter in the viewfinder at times just isn't visible.
Once I get my camera set on a tripod I have to look through the view finder to set the exposure in the meter that I cannot see. On my 7d I could look at the screen on top of the camera and set the exposure in a screen that was easy to see. Now I CANNOT!
Canon has taken creativity away for their automatic settings. Canon really took a camera with some really great features and ruined it!
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.