10-17-2014 12:06 AM
In the menu, trying to change Auto Lighting Optimizer. When I select that item I cannot make any changes...... The display shows a static (cannot be changed) selection of "Disable" (white letters on a blue bar), and below that a single item "OFF" enclosed in a red box. The multicontroller has no effect in trying to reveal other options/selections.
Solved! Go to Solution.
10-17-2014 12:38 AM
ALO and High Tone Priority cannot be used together. So make sure, you High Tone Priority is not turned on.
10-17-2014 12:38 AM
ALO and High Tone Priority cannot be used together. So make sure, you High Tone Priority is not turned on.
10-17-2014 12:53 AM
AHA!
I have hightone priority enabled.
Thanks!
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.