02-09-2017 03:20 AM
Just got the Selphy CP1200.
Tried it initially in direct Wi-fi mode. Using the Canon app on an android phone.
When I connect to the Selphy Wi-Fi SSID and then try and add the printer I get a message about mobile data is on and needs to be turned off.
The only way I can get the printer added is to turn mobile data off. If I don't the printer is not found.
Can anybody verify that this is correct behaviour?
If so why does mobile data need turning off? Seems an unnesseary extra step.
02-09-2017 01:21 PM
What app is being used when this occurs? Also, what type of mobile device are you using?
This didn't answer your question or issue? Find more help at Contact Us.
02-09-2017 01:43 PM
> What app is being used when this occurs? Also, what type of mobile device are you using?
Canon PRINT Inkjet/SELPHY android app
Moto G4 plus
02-09-2017 04:13 PM
The message appears to be related to certain Android devices.
Contact your service provider for details about the warning and to see if this can be prevented in the future.
If additional assistance is needed, find more help at Contact Us.
02-09-2017 05:10 PM
thanks, not sure how it' to do with the service provider , or is this somehow related to tethering (even though it's not.)
Anyhow the service provider are not going to do anything about it. especially given that they are generally usless 🙂
I presume the app triggers the message not the service provider.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 220.127.116.11
PowerShot SX420 IS - Version 18.104.22.168
PowerShot 620 HS - Version 22.214.171.124
PowerShot SX720 HS - Version 126.96.36.199
PowerShot G1X Mark III - Version 188.8.131.52
PowerShot G7X Mark II - Version 184.108.40.206
PowerShot G9X Mark II - Version 220.127.116.11
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.