04-08-2014 03:29 PM
have multipass/mp730 printer/fax. alert light stays on-says wrong cartridge, changed them,cleaned head still on can't print
04-23-2014 05:25 PM - edited 04-23-2014 05:26 PM
Hi lock,
Since changing the ink tanks and cleaning the print head did not resolve the error, please remove and reseat all of the ink tanks and the print head in the printer by following the steps at the link below:
MultiPASS MP730 Removing / Reseating the Ink Tanks and Print Head
Once the ink tanks and print head have been reseated, please turn off the printer, unplug the power cord and leave it out for at least 10 minutes, then plug it back in and turn it back on. If the error persists, the printer will require servicing. Please Contact Us for your servicing options.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.