Desktop Inkjet Printers
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

STATUS: OFFLINE. MG5400.

I have a lot of my time invested in finding a solution to the dreaded and common problem of not having my CANON printer turned on.   I have connected USB cable, deleted and replaced drivers, and CANON cannot even figure out how to turn on their devic...

Scanner only scans in sections?

I'm trying to scan a few documents as pictures with my Canon MX472 and it's scanning my document in sections. For example, instead of scanning the entire document as one photo, my document gets split into two or three different pictures. Anyone know ...

Rchey by Apprentice
  • 16278 Views
  • 2 replies
  • 0 likes

can't install firmware update

I am trying to install the firmware update, and followed the instructions I found on a Canon post.  Everything seemed to be working fine and it was downloading, then all of a sudden the computer shut down, only to restart and give a message that the ...

slmer by Apprentice
  • 4445 Views
  • 3 replies
  • 0 likes

MP830

 I have a MP830 and the red will not print. I have cleaned and deep cleaned the heads and changed cartridges. Still not red. I am using Canon ink.

billt502 by Apprentice
  • 2529 Views
  • 1 replies
  • 0 likes

CD/DVD print

I had an ip4500 and used CD-LabelPrint to print a Jpeg photo directly onto a CD/DVD. I have now moved to an ip4950 (the ip4500 died) and I'm struggling a little. The CD-LabelPrint still works but it doesn't work well with the 4950. It insists on me s...

PerryM by Apprentice
  • 4267 Views
  • 1 replies
  • 0 likes

Canon MP 495

I bought a new Dell Vostro laptop and it automatically picked up my MP 495 off the WiFi network. However, i do not know how to avail of the auto scan feature of the 495 that is available on my old Dell laptop in the new one. I looked for MP 495 drive...

MG7550 leaving marks on prints

Hello, After figuring out how to print on discs the way I wanted, I started to experiment a bit with printing on different media.I bought different types of paper so I could compare the quality and decide what's the best for my needs. First I tried s...

Mumu by Apprentice
  • 7473 Views
  • 2 replies
  • 0 likes

fuzzy output from CanoScan 9000F MkII

I purchased this scanner about 18 months ago, but just started using it. I noticed that the photo scans are very slightly fuzzy. It is improved with the "unsharp mask", but this infuses noise into the image. It seems like a lens is slightly out of fo...

Unanswered Topics
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.