Printer Problem
I havea Pixma Mx410 Printer. It just started to print duplicate on the same page. How do I fix it?
Posts
pixma MX850
I'm getting an error 5100 on the display. I checked for clogged paper and didn't find anything. I unplugged the machine for 5 minutes as my Quick Start Manual says to do and plugged it back in. I still have the same problem which is the paper gets...
Resolved! Pixma IP7220
Not sure if this is the right forum but figured I'd give it a shot.My existing printer Canon Pixma IP4820 finally died (won't turn on).Don't know if it's the power cord or something internal and don't care.Time for a new printer anyway. Decided to g...
CANON MX490A PRINTER - CANON PG-245XL CARTRIDGE
I PURCHASED A REPLACEMENT INK CARTRIDGE- CANON PG-245XL LAST SUNDAY FOR $47.95 AND THE PRINTER IS TELLING ME THE CARTRIDGE IS EMPTY AFTER PRINTING 8 PAGES???
Canon MG2900 series printer not responding?
Hi i have never had any problems with my printer until today! The printer will not turn off or on, i have unpluged and tried again still nothing. I opened the ink cover and nothing happens. At the moment the t I have unplugged the printer and left it...
MG3620 and MX472 Printing Gray and Slow
I booted up my printer (the MX) yesterday and printed out gray text despite the document being black. I checked the ink and it was low, so I replaced with a completely fresh ink. The printer kept printing gray, and very, very slowly. So I switched to...
MX922 Printer Won't Print Pictures Properly from top tray
My MX922 printer is not printing pictures properly from the top tray (i.e. distorting colors). If I select the bottom tray and print, the pictures seem to print fine without distorted colors. Can anyone recommend how to fix this?
Pixma MP970 & Pixma TS9020 - Out with the Old, In with the New?
Hi! I've own 3 laptops, all running Windows 10 Home. The newest I use all the time, connecting to the Pixma TS9020. I've been updating the 2nd & 3rd computers, which have Pixma MP970 software on them. I tried printing from the 2nd & 3rd computers ...
Long strip attached to spring yanked out by 2 year old. Pixma MX492 Personal printer
My 2 year old pulled out a part on my printer, and I would really love to figure out how to put it back in. A photo of the inside of your printer or any help is enormously appreciated. When I turn it on, the printer cartridge assembly slides over and...
Resolved! canon mx476
i should point out i am in Australia am i able to connect my mx476 via print assist to my android phone samsung a70am i also able to connect mx476 wirelessly to my windows 10 lap topif either is possible links to videos or instructions would be aprec...
TS5160 Auto feeder doesnt scan
I can copy but not read docs for scanning through the rear Auto feeder.....the docs do not get pulled through the printer.what am I doing wrong
MG7120 PGBK problem
Since changing the ink in my canon MG7120 printer, we've been having this issue. All other colours print fine. I have tried deep cleaning and aligning the thing several times. Any ideas? Would a new ink cartridge maybe fix the problem or am I better...
Pixma 2500 won't align printhead
After starting the alignment process, the sheet prints out with no problem. But when I place it on the platen and press the start button as instructed, I get this error message: I have tried this everal times with different c...
Screen intensity
Is it possible to adjust touch screen intensity on a Canon TR 8520 printer?Thanks,Ben
MG6150 insists on printing from the rear tray only
I have set the machine to print from cassette and also set this in the printer driver (Win 7 Pro 32 bit) where duplex is ticked. The messages come up that the printing will be from the rear tray and then that there is no paper. Inserting paper and to...
