10-15-2023 04:17 AM - last edited on 10-15-2023 08:13 AM by James_C
I recently purchased a Canon TS3522. Whenever I try to duplex print, it prints two single sided pages rather than a single, double sided page. It prints both pages back to back, pauses, prompts me to flip the pages and reinsert them into the printer, and then sends both through without printing anything on their rear.
The settings used are:
Duplex Printing (Manual)
Plain Paper, Letter 8.5"x11", Standard Quality
Page Layout: Normal-size
Any help would be appreciated, thanks!
10-17-2023 12:46 PM
Hi,
So we can better assist you, please let us know what version of Windows or MacOS you are using.
If you would like assistance in real time, I recommend you reach out to Canon support. You will need to register your Canon gear HERE to access additional support options.
We look forward to hearing from you.
10-19-2023 10:29 PM
Thank you for the help; I am using Windows 11.
10-23-2023 03:59 PM
Hi,
Looks like you have the correct driver settings. Does this happen on anything you try to duplex print or is it a specific file?
We look forward to your reply.
10-23-2023 08:56 PM
I don't have this printer, but I viewed the manual for it at Canon. Page 185 told me that this printer duplexes by choosing "Duplex Printing (Manual)", printing the front, then you have to manually turn the sheet over and feed it thru again. It does not have automatic flipping-the-paper-over-and printing-the back capability.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.