03-22-2023 12:01 PM
It was printing fine but the copies were very light. I did a print head cleaning and now yellow light comes on and the LCD display on the printer blinks E 5 9. It was printing fine before. Even thought the cartridges still had ink but were low, I put in fresh Canon ink cartridges. Here is what I did to try to fix.
Reboot printer and computer both before and after uninstalling and re-installing the printer and after downloading updated drivers. Go back to printer cartridges that worked before print head cleaning. Try to bypass wifi and do a direct hardwire to Macbook. Nothing works. The printer que says that the document was sent to printer and it is printing. The printer flashes yellow light and E 5 9 on the LCD. Supposedly this error means that the plastic on the ink cartridge is still on but it will print a test page and it will print the network configuration page, so obviously there is nothing wrong with the cartridges. It will print from the old Toshiba laptop which is not a primary computer but used only when a website or program has issues with Mac. Ready to throw the printer away and take the loss on the $50 worth of new ink I just installed. HELP!!
Solved! Go to Solution.
03-28-2023 10:18 AM
Hi,
E,5,9 appears when the paper size settings at printer driver do not match the paper size registered in the printer. Please click HERE for steps to resolve this issue.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
03-28-2023 10:18 AM
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 1.1.0.0
PowerShot SX420 IS - Version 1.1.0.0
PowerShot 620 HS - Version 1.1.0.0
PowerShot SX720 HS - Version 1.1.0.0
PowerShot G1X Mark III - Version 1.1.0.0
PowerShot G7X Mark II - Version 1.2.0.0
PowerShot G9X Mark II - Version 1.1.0.0
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!
EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STMCanon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.