11-22-2022 04:13 PM - last edited on 11-23-2022 09:31 AM by Danny
I am using a MacBookPro running Ventura 13.01 and I cannot figure out how to set the paper source between the cassette and the rear feed. The instructions say to go to the print driver but there is no way to access that on the Mac System Settings.
Any help would be appreciated.
Personal email removed per forum guidelines
Solved! Go to Solution.
11-23-2022 09:23 AM
When I select Print this dialogue shows up. You can scroll and click dropdown arrows to reveal options.
11-23-2022 09:23 AM
When I select Print this dialogue shows up. You can scroll and click dropdown arrows to reveal options.
11-23-2022 09:58 AM
HI John,
I get that screen when I print from calendar, mail, or excel, but not when I print from Word or Acrobat reader. Strange!
11-23-2022 10:07 AM
I get it in Word.
11-23-2022 10:21 AM
Strange. I'm running Word for Mac Version 16.67. Is that wha you are using?
11-23-2022 10:28 AM - edited 11-23-2022 10:38 AM
Also 16.67
11-23-2022 10:42 AM
Fortunately I don't use Word that often. So this will just remain a mystery.
Thanks.
Jim
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.