cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Setting TR8620a paper source

JimCary
Apprentice

I am using a MacBookPro running Ventura 13.01 and I cannot figure out how to set the paper source between the cassette and the rear feed. The instructions say to go to the print driver but there is no way to access that on the Mac System Settings.

Any help would be appreciated.

Personal email removed per forum guidelines

1 ACCEPTED SOLUTION

jrhoffman75
Legend

When I select Print this dialogue shows up. You can scroll and click dropdown arrows to reveal options.

Screenshot 2022-11-23 at 9.21.41 AM.png

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

View solution in original post

6 REPLIES 6

jrhoffman75
Legend

When I select Print this dialogue shows up. You can scroll and click dropdown arrows to reveal options.

Screenshot 2022-11-23 at 9.21.41 AM.png

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

HI John,

I get that screen when I print from calendar, mail, or excel, but not when I print from Word or Acrobat reader. Strange!

jrhoffman75
Legend

I get it in Word.

Screenshot 2022-11-23 at 10.06.12 AM.png

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

JimCary
Apprentice

Strange. I'm running Word for Mac Version 16.67. Is that wha you are using?

Also 16.67

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

Fortunately I don't use Word that often. So this will just remain a mystery.

Thanks.

Jim

Announcements
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!