Hi, jwooley14.
In addition to what Shadowsports stated, you will need the ICA Driver and Scanner Driver (both found on the same page linked above). Once all three drivers have been updated, you will need to remove and re-add the printer using those new drivers.
To remove the printer:
- Open System Preferences and select Printers & Scanners.
- Select the "Canon MX920 series" from the list of printers.
- At the bottom of the printer's list on the left side, click the [ - ] to remove the printer.
To add the printer after removing it:
- At the bottom of the printers list in the Printers & Scanners window, click on the [ + ].
Note: if you get a single-column context menu extending from the button, select Add New Printer or Scanner to open the correct next window.
- In the list of available printers, select the entry for "Canon MX920 series" listed with "Canon IJ Network" (for Wireless or Wired LAN) or "Canon IJ Multifunction" (for USB) as the kind.
- Ensure the Use drop-down automatically goes to "Canon MX920 series," then click on Add. If prompted to confirm, click OK.
Once you've updated it as above, the printer should be able to view the computer across the network. If it does not, you may need to update the printer's firmware and, if connecting by wifi, move the printer closer to the router (no closer than ~ 2 ft).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
