04-30-2020 12:44 PM
Can anyone tell me a way to leave the Operations Panel , on my new TR8520 CLOSED, and still print?
How FAR does it need to be "open"? ( 30 degrees, 45 degrees, 90 degrees?)
I print infrequently, and the protruding OP really clutters up the desk. Plus, it seems very flimsy, and bounces as you push the screen "buttons".
Has anyone tried to bypass whatever sensor shows the panel is open?
I might be able to understand pulling out the print tray, although the 7 year old printer I just wore out never required me to do so. It was very nice top leave the tray pushed in, if only printing 1 or 2 pages, and leave the desktop less cluttered. But, I see no reason for the required movement of the OP.
Now, this "new" Canon means I cannot leave my OP closed, or my tray pushed in. Leaving the OP open is just asking for it to be damaged, as other items are moved around in the workspace. I cannot print from a device located in another room and pick up the print copy later. I MUST first walk to the printer and make sure my OP is open, and my tray is pulled out. This is a REALLY poor design, and going backwards in terms of convenience.
There seems to be no point ( no space inside is saved, nothing protrudes into the printing space, etc.) in opening the panel. It only makes the touch screen more flimsy, and it CERTAINLY clutters up the desktop. I thought the panel, as displayed "open" in advertising pictures, was only an option ( possibly for a viewing angle). Most of the pictures I saw showed the panel lit up and still closed, which led me to believe the printer would actually work with the OP closed. This is how every other printer I've owned worked.
If there is no solution to leaving the OP closed, I will NEVER buy, or recommend buying, another Canon product like this. It is almost a guarantee this flimsy "open" panel will break prematurely. Right now, I would even return this unit for a refund, if I could.
05-01-2020 10:13 AM
I can confirm that the touch panel does have to be open in order to print. The few inches required wouldn't pose any significant problem (for me), but maybe I have a larger workspace. I can't really comment on build quality. Its a $70 printer and does quite a bit for the money. Copy, fax, scan, print (photos too). If you are worried about breaking it, maybe you need to re-evaluate your placement or location decision. Face it in another direction, etc.
Bay Area - CA
~R5 C (188.8.131.52) ~RF Trinity, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10~6D2 (v1.1.1) Retired ~EF Trinity, others ~DxO PhotoLab Elite ~Windows10/11 Pro ~EVGA RTX 3080Ti FTW3 Ultra ~ImageClass MF644Cdw ~Pixel6 ~CarePaks Are Worth It
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 184.108.40.206
PowerShot SX420 IS - Version 220.127.116.11
PowerShot 620 HS - Version 18.104.22.168
PowerShot SX720 HS - Version 22.214.171.124
PowerShot G1X Mark III - Version 126.96.36.199
PowerShot G7X Mark II - Version 188.8.131.52
PowerShot G9X Mark II - Version 184.108.40.206
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.