cancel
Showing results for 
Search instead for 
Did you mean: 

Pixma MX330 Printer Ultra light print - unreadable

mmustoe
Apprentice

Hi all, hope someone smarter than me has an easy answer.  Been away awhile, printer working fine before.  Set it up again today, I had to DL drivers from Canon.. they don't officially support Windows 10, but I selected Win 8 x64, installed fine (same as before).  SW setup appeared to have worked fine, OS recognizes correct printer model.  Used the 'Print Test Sheet' function and a ghost page printed... so light I could barely see it, but knew what I was looking for, so I know it 'tried'.  I used 'View Printer Status' - say all Ok, I checked 'Ink Details' and it too says "Ink levels adequate".   

I also tried the 'cleaning' an 'deep cleaning' options on the Canon Printer Properties app, neither produced paper output, though I'm not sure if they are supposed to.  Both appeared to complete successfully.

Hate to order new ink cartridges if that's not the problem...  Any Ideas or suggestions?  

Please & Thanks!

1 ACCEPTED SOLUTION

mmustoe
Apprentice

Thanks all for the ideas.. I did the cleanings and other maint tasks, but in every case, a sheet would roll thru with a REAL ghost image... if I didnt know what I was looking for, I might have thought it a blank page.  Anyhow, the ink cartridges showed full (and felt so when removed), but the printer had been in storage for a while (climate controlled), but, found a vendor on Amazon, said "If our cartridges don't fix the problem, send em back:.  I ordered them, 2 fays later, installed, and the printer is now working fine.  This company 'ejet'  also includes a postage paid return envelope to send back the old ones for proper recycle.  Case closed, needed new ink. 

View solution in original post

6 REPLIES 6

jrhoffman75
Legend

Nozzle check should produce a printed paper that shows the nozzle check results. If you ran cleanings you should print a new nozzle check to see if the cleaning worked. 

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, MX472, LR Classic

Thanks... tried the Nozzle Check procedure, and it too, printed the 'almost invisible' printout... it did however push a pc of paper thru - lol... Guess next step is replacing the cartridges.  I will however, be real upset if throwing $$$ & time at it still doesnt work ... such is technology. 

jrhoffman75
Legend

Before you replace cartridges you should run some deep cleanings to be sure nozzles on head are clear.

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, MX472, LR Classic

I have the same issue...print out is not easily even readable.  I have:  run ALL the maintenance tasks X 2...there was no problem there to be fixed.  All the cartridges are full.............I had this issue about a year ago and my grandson fixed it....even though Canon cannot !!    There was an option on one of the 'print' settings pages where the wrong option was checked.  I did NOT do that because I had never been to that page before.  Problem today is that I cannot find that page....so I can correct the problem just by changing an option.     This has nothing to do with: Cartridges, dirty print heads, paper, dirty anything...or the Driver !  ....fIt was a page where you had the option to print an image:   like the example shown or NOT like the example shown....which is the correct option.    This should not be rocket science, folks.

CJC444
Apprentice

You may see my post on this.  Do NOT purchase new cartridges.  The  problem is a 'setting' somewhere that has the wrong option checked.   Bring in some neighborhood kids and they will find the page you need.

mmustoe
Apprentice

Thanks all for the ideas.. I did the cleanings and other maint tasks, but in every case, a sheet would roll thru with a REAL ghost image... if I didnt know what I was looking for, I might have thought it a blank page.  Anyhow, the ink cartridges showed full (and felt so when removed), but the printer had been in storage for a while (climate controlled), but, found a vendor on Amazon, said "If our cartridges don't fix the problem, send em back:.  I ordered them, 2 fays later, installed, and the printer is now working fine.  This company 'ejet'  also includes a postage paid return envelope to send back the old ones for proper recycle.  Case closed, needed new ink. 

Announcements
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
03/22/2022: New firmware version 1.2.0 is available for PowerShot PICK
03/16/2022: New firmware version 1.5.2 is available for EOS-R5
03/16/2022: New firmware version 1.5.2 is available for EOS-R6
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.1.1 is available for EOS-R3
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x
12/7/2021: New firmware version 1.1.1 is available for CR-N 300
12/7/2021: New firmware version 1.1.1 is available for CR-N 500
12/2/2021: New firmware version 1.1.0 is available for RF 70-200 F4 L IS USM