02-05-2024 06:47 PM
My mom is trying to print a W-2 on our printer, but when she does, the result is a smudgy, indiscernible mess. I tried cleaning it, I tried Bottom Plate Cleaning, no matter what I do, the result is always the same and I don't know why.
02-07-2024 01:19 PM
Hi,
If the ink is wet on the paper and smudging, double check the type of paper you are printing on. Make sure it is plain paper and not the backside of photo paper.
If the ink is not wet and it looks like everything is double printing or printing right on top of each letter, then please use the steps HERE to clean the encoder strip in the printer.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
02-07-2024 06:32 PM
We are using plain paper and we just had the printer a for few months and it was the first thing printed from it.
02-28-2024 08:05 AM
This is what happens whenever we try to print something.
03-13-2024 01:38 PM
Hi,
Based on the picture and since the cleanings did not resolve the issue, I recommend reaching out to Canon support for your warranty options. You will need to register your Canon gear HERE to access additional support options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.