12-02-2022 06:06 PM - last edited on 12-06-2022 08:50 AM by Danny
Hello and thanks in advance. Is there a way to do a hard reset on this printer? Not a network reset but a hard reset where all of the data will be wiped of the printer. The reason is is because I've got new cartridges in this computer yet the ink levels are showing nearly empty for both the color and the black cartridges.........like it showed after I used the starter cartridges that came with the printer. I've removed and re installed the cartridges. I've unplugged and plugged back in......nothing changes the ink level readings. I'm concerned if the levels show empty it's going to deactivate my cartridges because the printer thinks they're empty and will not allow me to print. Also, these are Cannon cartridges. Very frustrated and any help would be appreciated.
12-03-2022 10:23 AM
Instructions for changing inks TS3520 / 3522
Canon Knowledge Base - Replacing an Ink Cartridge - TS3520
Bay Area - CA
~R5 C (188.8.131.52) ~RF Trinity, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10~6D2 (v1.1.1) Retired ~EF Trinity, others ~DxO PhotoLab Elite ~Windows10/11 Pro ~EVGA RTX 3080Ti FTW3 Ultra ~ImageClass MF644Cdw ~Pixel6 ~CarePaks Are Worth It
12-03-2022 11:45 AM
Hello and thank you once again in advance, esp for the individual that promptly helped we when I asked my first quest, which I should have asked in a different way because it may have been confusing what I'm asking. When the ink level meter on this computer gets low or runs out can you still print with the printer or will the printer automatically stop printing? I know for a fact these new cartridges have plenty of ink in them but the ink level counter is not picking them up as full, the counter is picking them up prob about 1/4 full. I've tried the reset recommended in the manual, along with various other things online, but have not found a way to deal with this with this specific printer. Is there a way to disable the ink counter so that I won't have to worry about this going forward. I really don't feel like returning the printer even though it still is under warranty. Thanks in advance
12-06-2022 08:32 PM - edited 12-06-2022 08:33 PM
Hi Swilson3828! Thanks for posting in the Canon Community Forum. I see that your PIXMA TS3522 is not reporting the correct ink levels and you are wondering if you can bypass the error so you can continue printing.
If the cartridge levels show that the ink is out, your computer may show either a 1686 or a 1688 error. At the printer, the display will be flashing the E13 or E16 codes. When you see either one of these two error codes blinking on the printer’s display, you can bypass the error by holding down the STOP button for five seconds.
The Stop button has a symbol that looks like a triangle inside a circle. You can refer to the following article and sections of the manual for more information:
If the printer’s display is flashing a different error, please refer to the following section of the manual:
I hope this information helps. Thanks again.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 184.108.40.206
PowerShot SX420 IS - Version 220.127.116.11
PowerShot 620 HS - Version 18.104.22.168
PowerShot SX720 HS - Version 22.214.171.124
PowerShot G1X Mark III - Version 126.96.36.199
PowerShot G7X Mark II - Version 188.8.131.52
PowerShot G9X Mark II - Version 184.108.40.206
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.