07-08-2017 01:20 PM
Solved! Go to Solution.
07-08-2017 03:34 PM
06-27-2020 03:05 AM
This is how I fiwed Mine It has been fine now for over a year. If it doesnt work on the first try. Do the steps again and put in new ink. its cheap on ebay you can get 3 full reloads for 16.00 dollars.
If you have the B200 Error. To get out of it. 1.Push the power button. Unit will shut off. 2. Unplug Power cable. 3. With the power cable unpluged hold power button in for 10 seconds. 4. Plug power cable in & press Power button. This will get you to the main screen. 6.Use the up down arrows to get you to Setup. 7.Clik setup Use right arrows to to estimated ink level clik ok. 8. Replace any Ink with yellow triangle. 9. Clik back arrow go to setup. 10 Clik ok on setup. Use left arrow hightlight device setings. 11. Clik ok on device settings. use bottom arrow scroll down to Firmware update you must be online. Clik Ok on the update when prompted clik yes let printer get update. 12. After you see Succeees Updated Clik Ok. 13 Printer should now do B200 Error again. 14. Press power button shut down printer. 15. Press power button Firmware loads on start up Error is Gone
08-26-2020 09:16 AM
The "fix" of starting it, then opening and closing the cover works, until you try and do something. Then the printer literally DIES. No power, nothing. I had this exact same thing happen to TWO MX922 printers in the past 2 weeks.
HELP!!! Now what do I do? The printer is DEAD. No power, nothing. It is NOT the power supply, as I have checked that .
08-26-2020 09:45 AM
08-26-2020 11:02 AM
08-26-2020 01:38 PM
I have about 10 years of ink (the off-brand carts are less than $1.00 each on eBay). I don't want to give up on them ( I have two left with teh exact same NO POWER issue. I am going to take a chance and buy a main board ($30 on eBay) and see if that does the trick.
08-26-2020 03:39 PM
03-19-2021 11:10 AM
@jsorealty,
Did that ebay replacement work that you mention in https://community.usa.canon.com/t5/Printer-Multifunction-Support/PIXMA-MX922-with-error-code-B200-Se... ?
03-20-2021 10:02 PM
Hello, great that you asked. The HP relacement from ebay is a nice device and is working well for me. It has functionality that is very useful. The only drawback is that it does not print on both sides unless the paper can be flipped over and put back into the feed tray. The setup process was somewhat confusing but I took my time to get everything set correctly. I had rebuilt my MacBook Pro and upgade my HP desktop to Windows 10 and added a wireless USB adaptor to it. Two different computers and operating systems, wired or unwired connections, overall home network configuration, Google Drive and photos, and 1 Drive, icloud this cloud that, My Galxey phone, Samsung account, Google account, Microsoft pushing 360 accounts, Xfinity internet, Smart TVs. They all want to take control. too many ways to back up and sync to where. Updated drivers. don't forget to make new printer the default and all that great stuff. Sorry for this delayed reply. I am very happy with the HP OfficeJet 3830 and replacemet ink is readily available. The printer can auto order new ink. It prints at a nice speed and is a quiet printer. Good support at the HP website. The HP scan and printer Doctor works well and I did use it several times. The Doctor is Different than the Printer Assistant Device control panel) for Scaning, Faxing and printer. I was unfamiliar with device and software names at frirst but everything is working well. Thanks for asking.
09-02-2020 02:07 PM
After screwing around for 2 days now I'm done. I will never, ever, EVER!, buy any Cannon product ever again. And what pisses me off the most? I rarely use the printer but depend on the scanner! And NOTHING works if the printer doesn't! Now I've got to **bleep** around trying to trash it.
09-30-2020 01:58 PM
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.