02-26-2020 06:28 PM
I own a PIXMA MX452 where I have been successfully scanning until just a few days ago.
Now when I try to bring up the scanner utility, I am receiving error 'A scanner driver supporting this software is not installed. Install it and try again. (see attached screenshot)
I am on Windows 10 (x64). There was a windows 10 automated update done to my laptop last week so I have a feeling that has now screwed up this scan utility. I did confirm that 'SCANUTILITY.exe' is still installed at C:\Program Files (x86)\Canon\IJ Scan Utility but it will no longer launch successfully.
Any suggestions what I need to do to resolve my issue.
Thank you!
Solved! Go to Solution.
02-27-2020 03:52 PM
Hello.
Uninstalling and reinstalling the drivers might help with this issue. Please follow the steps below. If the printer is used with a USB cable connection to the computer, disconnect the USB cable from the printer first.
1. Click the Start Button and search for the Control Panel, then open the Control Panel.
2. Open "Programs and Features", or "Uninstall a program".
3. Uninstall the MX450 MP Drivers and the Canon IJ Network Tool if either of these are listed. If these are not listed, move on to the next step.
4. Go back to the Control Panel.
5. Open Devices and Printers.
6. Right-click and delete or remove any copies of the printer that are listed here.
Once this has been done, visit this link to download and reinstall the MX450 Series MP Drivers. Once the setup is complete, try using the IJ Scan Utility again.
02-27-2020 03:52 PM
Hello.
Uninstalling and reinstalling the drivers might help with this issue. Please follow the steps below. If the printer is used with a USB cable connection to the computer, disconnect the USB cable from the printer first.
1. Click the Start Button and search for the Control Panel, then open the Control Panel.
2. Open "Programs and Features", or "Uninstall a program".
3. Uninstall the MX450 MP Drivers and the Canon IJ Network Tool if either of these are listed. If these are not listed, move on to the next step.
4. Go back to the Control Panel.
5. Open Devices and Printers.
6. Right-click and delete or remove any copies of the printer that are listed here.
Once this has been done, visit this link to download and reinstall the MX450 Series MP Drivers. Once the setup is complete, try using the IJ Scan Utility again.
02-28-2020 05:13 PM
Thank you as that resolved my issue!!
Just one clarification for everyone, you had stated to also uninstall 'Canon IJ Network Tool' if listed. That was not specificially listed but 'Canon IJ Scan Utility' was listed which I did uninstall.
Thank you again!!
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.