Showing results for 
Show  only  | Search instead for 
Did you mean: 

PIXMA MX397 IJ Scan Utility, Error Code: 9,230,0 MX390 series and win10 20H4


the scaner driver is working but the IJ Scan Utility software is not working with Error Code: 9,230,0. How to get IJ Scan Utility work?

Anyone have the same issue?
1. A new installed windows 10 20H4,
2. Connected by usb to canon MX397
3. install IJ Scan Utility and detected MX397 and installed MX390 series driver printer, fax and scaner

4. open IJ Scan Utility to scan, come with error code Error Code: 9,230,0

control panel > device and printer, there is no MX397 scaner in the image capture section,

I've found scanner need to working on this way, but there is no pdf and other functions:

so I go to control panel > device and printer> mx397 printer.

then right click, (i can see the scaner is there), then choose the top of menu "open", open up a canon page with printer, fax and scaner inside.

and click on scaner setting from the screen, the scaner can scan from this page with preview and scan from this page. (the driver is ij scan unitily not mx390 series)

read some post regarding to this issue - it is the firewall or security software block the IJ scan unitily software, but this is USB connection not network connection.

08/18/2023: Canon EOS R5 C training series is released.

07/31/2023: New firmware updates are available.

CR-N700 - Version 1.2.0

CR-N500 - Version 1.3.0

CR-N300 - Version 1.3.0

CR-X300 - Version 1.1.0

06/30/2023: New firmware version is available for EOS-R5 C

05/31/2023: New firmware updates are available.

EOS R6 Mark II - Version 1.1.2

EOS R6 - Version 1.8.2

EOS R7 - Version 1.3.1

05/18/2023: New firmware updates are available.

EOS Rebel T100 - Version 1.1.0

EOS Rebel T7 - Version 1.2.0

EOS 5D Mark IV - Version 1.4.0

EOS 6D Mark II - Version 1.2.0

PowerShot Elph 360HS - Version

PowerShot SX420 IS - Version

PowerShot 620 HS - Version

PowerShot SX720 HS - Version

PowerShot G1X Mark III - Version

PowerShot G7X Mark II - Version

PowerShot G9X Mark II - Version


04/20/2023: New firmware version 1.4.1 is available for EOS R3

03/30/2023: New firmware updates are available.

EOS R5 - Version 1.8.1

EOS 1DX Mark III- Version 1.7.1

Speedlite EL-1 - Version 1.0.2

03/30/2023: Product Advisory for EF50 F1.2 L USM

03/30/2023: Product Advisory for EOS R10

02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5