07-26-2017 11:12 PM - edited 07-27-2017 12:52 AM
We hadn't printed for maybe 2 months on our MX922. When I went to print the text on things has a double vision. Attached is a sample of the print check (see the PGBK text, the PGBK grid, and Ver 200 text). I've done deep cleans, alignments, changed all the cartridges, and have removed the head and cleaned things. Everything seemsto print great except for this. Any solutions?
07-27-2017 01:16 AM
07-27-2017 11:29 AM
Troubleshooting with our support group will be needed to narrow down the cause of your issue. Please contact our support group using the "Contact Us" link below for additional assistance.
This didn't answer your question or issue? Find more help at Contact Us.
08-28-2017 10:03 PM
10-08-2017 10:38 AM
Hello, did you manage to solve this as i have exactly the same problem?
10-08-2017 05:45 PM
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.