06-04-2021 06:01 PM
Have an MX492 that has been connected USB to a Windows 7 desktop. The computer has been replaced with a new Windows 10 desktop. When installing, it gets to the Printer Connection window, which shows Printer Detected. After a while, that changes to Printer Not Detected. All connections are good. Same result multiple times.
Troubleshooting, connected it to a Windows 10 laptop, also via USB. Same thing. Any ideas?
06-11-2021 03:55 PM
Please disconnect the USB cable and then restart your computer.
When your computer restarts, press the Windows key on your keyboard and the letter R, then let both go.
In the Run window that appers, type CONTROL and click OK.
In Control Panel, click on View devices and printers. If there are any Canon MX490 series listed, please right click and then left click on Remove device.
Once all MX490 series are removed, click on the left arrow in the upper left corner.
Back in Control Panel, click on Uninstall a program.
In the list that appears, click on "Canon MX490 series MP Drivers" and then Uninstall at the top. Follow the on screen prompts to uninstall.
Once uninstalled, reboot your computer.
When your computer restarts, please visit the link below to download and install "MX490 series MP Drivers Ver 102", it is the last one in the list:
06-11-2021 06:39 PM
Thanks for the reply, but it didn't work. Now it doesn't detect the printer at all.
Installation did work fine with WiFi install on my test system, but client can't use WiFi.
06-16-2021 12:22 PM
I recommend you contact Canon support at 1-800-OK-CANON (1-800-652-2666), Monday - Friday, 8:00 AM - 8:00 PM EST excluding holidays.
You will need to have a Canon account when you call. If you have not created account, please click HERE:
08-31-2022 05:47 PM - edited 08-31-2022 05:53 PM
Found a fix to this. Run the installation once, this will install the software and drivers but will ultimately fail with the "Printer Not Detected" window. At this point the drivers are installed on the system but not linked with the device. Let's take care of that shall we.
In the Windows 10 Start Menu
1. Type in "Printers"
2. Select the "Printers & Scanners" application
3. You should see a malfunctioning "Inkjet Printer" in the list, click on that and click "Remove Device". Remove any other Canon MX490/2 devices listed.
4. Click "Add a printer or scanner" button (top of the Printers & Scanners window)
> Wait for the search options to appear
5. Click "The printer that I want isn't listed"
6. Click "Add a local printer or network printer with manual settings"
7. Select "Use an existing port:" | If this is your only printer select "LPT1", if this is your second installed printer select "LPT2", if this is your third installed printer select "LPT3".
8. Under Manufacturer, Select "Canon" | On the right side under "Printers", Select Canon MX490 series Printer (Make sure you don't select FAX). | Click Next
9. Select "Use the driver that is currently installed (recommended)"
10. Click Next | Complete any additional steps in this wizard to finish.
11. Turn the Printer On if it wasn't already on
12. Run the Canon MX490 Series Driver & Software Installer again.
This time it should work without any issues. Hope this helps!
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 220.127.116.11
PowerShot SX420 IS - Version 18.104.22.168
PowerShot 620 HS - Version 22.214.171.124
PowerShot SX720 HS - Version 126.96.36.199
PowerShot G1X Mark III - Version 188.8.131.52
PowerShot G7X Mark II - Version 184.108.40.206
PowerShot G9X Mark II - Version 220.127.116.11
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.