cancel
Showing results for 
Search instead for 
Did you mean: 

MG7720 print is blurred

ka6uup
Contributor

The characters are blurred. When viewed with a magnifier there are double characters offset slightly.

I have tried alligning the print heads with no success. There is reference to aligning the heads manually but I could not figure out how to do this. And don't even know it this is the problem.

What could be causing this?

I can provide a copy of a document if needed.

Thanks chuck

5 REPLIES 5

shadowsports
Elite

Greeting Chuck,

Not trying to be funny, but the manual has steps for performing maintenance, including aligning the print head.  This is indicated based off of your description.

 

MG7720 Manual

~Rick
Bay Area - CA
~R5C (1.0.1.1) ~Many Lenses ~DxO PhotoLab Elite ~Windows10 Pro ~EVGA RTX 3080Ti FTW3 Ultra
~ImageClass MF644Cdw ~Pixel6 
~6D2 (v1.1.1) retiring

Yeah I have gone through the the head alignment thoroughly. It did no good. the problem still exists.

is there a way to attach a sample of the problem?

I found an instruction on cleaning the Encoder Film. I have done this several times today and as far as I can tell it is clean.

When I print the "nozzle check pattern" the PGBK header shows double letters and the vertical grid pattern lines seperate into double lines in the middle of the grid

Chuck

Hi ka6uup,

 

I recommend cleaning the encoder strip one more time. The strip can look clean sometimes but there may be some remaining ink on it that will cause the double print.

 

If that does not resolve the issue the printer would need to be replaced. If the printer is still in it's 1 year warranty from purchase date and you have a copy of the paper or online receipt, please contact our support group at  1-800-OK-CANON (1-800-652-2666), Monday - Friday, 8:00 AM - 8:00 PM EST.

 

If the printer is out of warranty, you would qualify for the Canon Upgrade Program.

 

This is for out of warranty units which have been diagnosed to require service or are incompatible with a new or upgraded system. This program allows you the opportunity to purchase a replacement product discounted from the list price. Free ground shipping is included with your purchase.

 

If you would like to take advantage of this offer, please call our Sales Department at (866) 443-8002 seven days a week, 8 AM to midnight EST. Let them know you have been working with technical support and that the Canon Upgrade Program was offered.

printrunr
Apprentice

How did you make out with this issue?

I'm having the same issue before and after replacing all of my ink cartridges.  I've ran every test and cleaning option.  Color seems to be printing fine.  It doesn't seem like a "dirty anything" because it is a very consistant every three lines.  This seems more like a firmware or driver issue; of which I've updated both to the latest.  This is similar to what happened to my mg6xxx.  This will probably be my last Canon given that a set of ink costs almost twice as much as a similar quality Epson set at $100.  I run a printer test sheet every week.  I don't print enough to get into larger tanks. 😞

 

 

PXL_20201226_140629147sm.jpg

Announcements

08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/30/2022: Service Notice: EOS 70D: Error 70 or Error 80
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x