cancel
Showing results for 
Search instead for 
Did you mean: 

MG3600 sending "wake up"

toni_manoli
Contributor

Hello Cannon,

 

is there any way I send a  "wake up" to my printer without printing something. So the Printer went from sleep mode to fully on, so I can scan ?

 

Is there any option with cmd or a small program code for Visual Basic or c#

 

THX a lot

 

MG3600 Series with Windows

3 REPLIES 3

shadowsports
Elite

Greetings,

How is the printer connected to your system?

 

USB or wireless?

 

If wireless..

 

You can try. the following:

 

PING the printer

Open its webserver in a browser.

 

Assign it a static IP

~Rick
Bay Area - CA
~R5C (1.0.1.1) ~Many Lenses ~DxO PhotoLab Elite ~Windows10 Pro ~EVGA RTX 3080Ti FTW3 Ultra
~ImageClass MF644Cdw ~Pixel6 
~6D2 (v1.1.1) retiring

Hi shadow

 

yes i use wlan

 

how i PING the printer?

Hello Toni_manoli,

 

If the printer is in sleep mode a scan command should be able to wake the MG3620 up like a print would. We would be happy to assist with the issue. To provide some feedback or some troubleshooting steps, we would need some additional information. If you could reply to this message with the information below, we can provide some assistance.

 

  1. What version of the Mac or Windows operating system are you using on your computer?
  2. What program are you using to scan?
Announcements
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
03/22/2022: New firmware version 1.2.0 is available for PowerShot PICK
03/16/2022: New firmware version 1.5.2 is available for EOS-R5
03/16/2022: New firmware version 1.5.2 is available for EOS-R6
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.1.1 is available for EOS-R3
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x
12/7/2021: New firmware version 1.1.1 is available for CR-N 300
12/7/2021: New firmware version 1.1.1 is available for CR-N 500
12/2/2021: New firmware version 1.1.0 is available for RF 70-200 F4 L IS USM