03-01-2022 05:29 PM
Put in a new canon pgbk black. After that every time I closed the printer a different cartridge would say it wasn’t recognized. Which one changed every time I closed the printer. I tried pulling out the print heads, resorting every thing. Same problem.
took the new cart out and put the old back in. It still has some Ax’s over some of the cartridges. I was able to print (not perfectly) but I can’t put a new cartridge in without this problem.
03-14-2022 01:48 PM
Hi Wld8hrt,
Please open the cover to your PIXMA MG7520.,
From left to right, please make sure that the following ink tanks are installed:
CLI-251BK
CLI-251GY
CLI-251Y
PGI-250PGBK
CLI-251C
CLI-251M
How many ink tanks have been replaced since receiving this error? Which inks have been replaced?
What is the error code that appears at the top of your printer's display?
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.