02-12-2023 07:21 PM - last edited on 02-14-2023 09:33 AM by Danny
Hi There,
I want a wired instead of wireless set up for the printer (below) that I'm going to purchase.
I've learned that the USB cable is not included.
Can anyone tell me which USB Cable is needed for this printer?
It is the: Canon PIXMA TS6420a All-in-One Wireless Inkjet Printer
Thanks in advance, 🙂
02-13-2023 01:13 PM
A standard USB A-B cable is all you need. Nothing special about it.
05-12-2024 02:48 PM
Did you find a cable that works? The USB A-B cables (tested 2 of them) do not fit as the housing appears to be too deep for the printer cables.
05-12-2024 02:54 PM
They're just standard cables like this:
05-13-2024 08:58 AM
The 1st cord I tried had too large of a housing around it. I was finally able to get a cord to work. It has to go in at a slight angle. All is well. Thanks.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.