03-16-2023 12:25 PM
I just installed a new G7020 AIO on a Windows PC and am successfully printing on standard paper from the bottom tray. OK so far. Now I want to print on 5 x 8 inch index cards. I load them into the rear tray, close the little feed slot cover and then have to select both size and type. Index cards are slightly heavier than 20 lb and the 5 x 8 inch size is not among the available selections. Any suggestions how to specify and succeed with printing?
Can I create a custom setting and have the software store it?
Regards...
Solved! Go to Solution.
03-16-2023 01:02 PM
OK to ignore. Twenty minutes of persistent exploration and some trial and error with my new toy gave the results I was looking for. Still climbing the learning curve. TNX
03-16-2023 01:02 PM
OK to ignore. Twenty minutes of persistent exploration and some trial and error with my new toy gave the results I was looking for. Still climbing the learning curve. TNX
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 1.1.0.0
PowerShot SX420 IS - Version 1.1.0.0
PowerShot 620 HS - Version 1.1.0.0
PowerShot SX720 HS - Version 1.1.0.0
PowerShot G1X Mark III - Version 1.1.0.0
PowerShot G7X Mark II - Version 1.2.0.0
PowerShot G9X Mark II - Version 1.1.0.0
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!
EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STMCanon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.