03-08-2023 11:13 AM
I have owned my G6020 since October 2020. I have been very happy with it until recently. The print quality has deteriorated. It is especially bad printing envelopes, but the problem also happens with regular printing. Characters at the beginning of the first few lines and at the end of some lines do not print completely. (See sample below.)
The problem improves with each page printed. If I print a long document, everything looks great after the fourth page or so. However, when I print a new document, the problem is back on the first few pages.
I have cleaned and deep cleaned the heads, flushed the ink, re-seated and re-aligned the print heads. None of these steps had any effect on the problem.
How can I fix this?
03-13-2023 09:12 AM
Hi,
You can also try cleaning the encoder strip inside your printer. Please click HERE for the steps.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.