04-04-2016 09:44 AM - edited 04-05-2016 10:05 AM
Hello all, I have a Canon Pixma IP4200 which I happily use since a few years.
Now happened that I left it unused for a few months, then when I reused it I found that it print with "strypes".
I send you two images below to see the problem.
Seems like there is a serious problem in the "C" column...
I made several cleaning cycles and alignments of the heads but nothing changed.
I would like to know what kind of problem that can be and if I can solve it in some way.
Thanks a lot.
Mario
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.