08-17-2024 12:21 PM - last edited on 08-20-2024 10:48 AM by Danny
I bought a new camera after using the T5 for many years. I had the EOS Remote Utility v2 programmed with macros to allow me to assign the Utility functions to keys on a special keyboard and be able to change to complex settings in just one key press.
Now, with my EOS R100, I had to upgrade from EOS Remote Utility v2 to V3. Things are different but I have spent many hours doing the programming using “Pulover's Macro Creator”. I’m an amateur but I have been using this for years to program the Utility for use with my keyboard. I have always been able to make the keys work the way I want. The “Marco Creator” learns by your key presses and by mouse clicks.
Now, I have run into a dead end, and I wish I were talking to the programmers of the EOS Utility V3 because this is something the users can’t change and I see no workaround.
Here is what I would like:
Then I could work with that and this is how the V2 Remote Utility worked. Right now it is impossible to program this menu and I am losing 16 of my settings which include combinations.
I can only think that different programmers worked on the different menus.
Please see my screenshots below.
I hope I can get some help so I can use the utility.
Thanks for your input.
Regards,
Ed
08-19-2024 08:15 PM
Hello 1234minn,
If you would like to speak with a Canon representative, please contact our Technical Support Team at 1-800-652-2666, Monday through Friday between 9:00 am to 6:00 pm ET. They can submit your inquiry and request to our engineers for review. This sort of information helps and is considered when they do look at possible updates based on what customers' needs and wants are.
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.