cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

EOS Utility Shuts Off on Own During Live-View Usage

Kpop
Apprentice

So I have a Rebel t2i connected to my PC (Windows 10) with the USB port, and it automatically starts the EOS Utility software when I connect it, but after 30 minutes (I have multiple videos that show it's 30 minutes) the software will automatically shut off.

 

• I'm using the Live-View, not recording though. I keep the live-view open and do a window capture in OBS so that I can have a quality camera as a webcam for streams. (I'm fully aware that this camera is old, but it's better quality than a $60 webcam).

• The camera is on AC power, and the camera itself doesn't shut off when the application closes.

• All I have to do is press a button on the camera and the application starts again - I don't have to replug anything. 

• I'm not recording during because I get lag when I do this, and I don't want that.

 

• I've looked into the settings, and can't find anything that would cause it or make sure it does not happen.

• I've tried "automatic shut off (except with AC power)" on and off and it doesn't change anything.

• The version I'm using is up to date.

• Tried with and without SD card, doesn't change anything.

• Changed cables and it doesn't change anything.

• I've tried pressing buttons in the app preiodically to let the app know it's being used, and it hasn't worked.

 

I don't know why an app would close out every 30 minutes on it's own, I haven't had that issue with anything else. 

Let me know if there's any more info that could help, or any other (cheap) way for me to connect my t2i to OBS/Streaming Software that won't shut off every 30 minutes.

13 REPLIES 13

If you use the "green mode" on the camera, does that prevent you from changing settings (e.g. aperture)? 

Hello i just got into this camera thing but for streaming using OBs i have a Rebel T2i the settings for auto shut off are alredy enabled to "off" and after 30 minutes still disconnects from the webcam utility software even using the HDMI output still does the same is there another way to get around it?

benjaminfisher
Contributor
Auto off needs to be set to 1 minute

ohh ok i'm trying it now so far it didn't shut off thanks for the tip 🙂

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.