Showing results for 
Show  only  | Search instead for 
Did you mean: 

DPP 4.12,0.4 Minor bug


I upgraded to yesterday and overall it seems to work well but with this latest update, randomly the CTRL + D convert and save keyboard shortcut doesn't work after using some of the editing tools on an image. 


It is random and not that frequent but enough to be annoying when processing several hundred images.. Either using the menu  convert and save option or clicking on a couple of different tools will restore it to full functionality.  Hopefully there will be a 0.5 update to address this little glitch. 


Speed seems the same as prior versions and is responsive except when running digital lens optimizer on 5DS R files it can take 45 seconds at times to finish that operation and this is on a fast dual processor workstation.  This is just a slow algorithm in DPP and during the processing time CPU and GPU load never go over 20% so it doesn't do a great job of utilizing available resources.  Each Xeon processor has its own 128 GB of fast RAM so memory isn't the issue and memory utilization stays below 10%.


AND on edit, more strange CTRL + D behavior:  When shooting multiple bodies at an event, during initial file transfer I keep the 5DS R files in a separate directory from the 1DX and 1DX 2 files because they tend to need different treatment in post.  After finishing the 1DX series files I navigated to the 5DS R directory and about midway through those files, CTRL + D would bring up the normal convert and save dialogue box BUT it would also bring up the same dialogue box you get when quitting DPP asking if you want to save photo file changes.  So there is definitely some oddball glitch.



EOS 1DX M3, 1DX M2, 1DX, 5DS R, M6 Mark II, 1D M2, EOS 650 (film), many lenses, XF400 video



We are sorry to hear that these issues with the software are occurring.  We recommend un-installing the software and then performing a complete re-install on the software to see if this resolves the issue.  Again, we apologize that this occurs but appreciate you bringing this to our attention. 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.



Thanks for your fast response and I appreciate that Canon personnel are so active (and helpful!) on this forum. 


I always do a fresh install with a new version of DPP because installing without removing the old version did cause some issues with early prior updates.  But this little glitch occurs with both my Z series workstation and Z book laptop after a fresh install.  It is random and quite infrequent and not a huge deal because the software still works fine outside of this minor annoyance which I am sure will disappear in a future upgrade.


I still have full faith in the performance of my Canon products and I am looking forward to the arrival of my 1DX III which was pre-ordered last month.  It will join its 1DX and 1DX 2 elder siblings in time for high school soccer season.



EOS 1DX M3, 1DX M2, 1DX, 5DS R, M6 Mark II, 1D M2, EOS 650 (film), many lenses, XF400 video

And one more interesting bit of DPP trivia, when working with at least some older CR2 files this version goes to black and white mode when the crop tab is selected.  It doesn't do any harm but is interesting behavior.  Once out of the crop window, color returns.


I was pulling a photo for someone who needed a photo of one of my pieces of Collins radio gear and when I was preparing to create a JPG from the RAW file DPP took me back to photography before my time (all black and white) 🙂


iPhone photo of DPP cropping a RAW file from my Canon 1D Mark 2.








EOS 1DX M3, 1DX M2, 1DX, 5DS R, M6 Mark II, 1D M2, EOS 650 (film), many lenses, XF400 video

Very cool old Marantz reciever there above your monitor. A 2285 perhaps?  Robot wink


You can tell it's a good one 'cuz it appears to have a high "K.P.D." (Knobs Per Dollar) factor. Robot LOL

Good eye BurnUnit 🙂  It is a 2285B.  Other than replacing some filter capacitors, dial lamps, and setting the output stage bias it has needed no maintenance.


These Marantz separates are with the vintage amateur radio gear in another room.  They did make some nice looking and sounding gear!  I like your money/quality metric 🙂





EOS 1DX M3, 1DX M2, 1DX, 5DS R, M6 Mark II, 1D M2, EOS 650 (film), many lenses, XF400 video
03/14/2023: New firmware version 1.8.1 is available for EOS R6

03/02/2023: New Firmware Updates Are Available:

EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version is available for EOS-C500 Mark II
05/26/2022: New firmware version is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version is available for EOS R5 C
03/23/2022: New firmware version is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.